SPECS

LOA:

LWL:

Beam:

Draft:

Displ.:

IM:

J :
ISPS :
P :
E :
UWSA :
DWSA

9.95 m / 32.64 ft

9.43 m / 30.94 ft

3.16 m / 10.38 ft 

2.45 m / 8.04 ft

2.260 kg / 4.982 lbs

13.32 m / 43.7 ft

4 m / 13.12 ft

15.12 m / 49.61 ft
13.70 m / 44.95 ft
4.77 m / 15.65 ft
70.1 sqm / 755 sqft
178.4 sqm / 1,921 sqft


 

DIMENSIONS

The X-Treme 32 hull form is honed to deliver performance across a wide wind range. The hull lines minimize wet surface in low-heel situations but maximize hull form stability when heeled. The maximum beam is carried well aft at the deck to insure crew weight is as far outboard as possible, providing maximum stability and straight heeled waterlines.

The deck geometry and hardware layout is optimized for efficient crew work while keeping windage to a minimum. Controls for the main trimmer are led to the cockpit floor centerline, just forward of tiller. Backstay winches are angled inboard to allow the crew to trim the backstay with feet outboard hiking.

 

The cabin geometry allows for optimized jib trimming at narrow lead angles. The slightly raised companionway houses an oversized hatch to allow for easy movement of sails to and from below decks, and conceals underdeck runs for halyards and controls lines from the mast and foredeck. The foredeck hatch has a soft rounded edge to facilitate smooth takedowns with an integrated line system for dousing spinnakers.

A full optimized structural design using advanced CNC techniques

• Design and constructed in accordance to ISO structural regulations to Class A with plan approval by Eurocontrol (inboard engine version)
• The hull and deck constructed from vacuum consolidated e-glass/vinylester/ foam sandwich
• Additional reinforcements in way of all deck fittings and other highly loaded area's
• The structural internals from vacuum consolidated e-glass/vinylester/foam with sandwich construction uni-directional and carbon fibre reinforcement
• Non structural internal components are built from e-glass/vinylester/foam sandwich construction

Exterior and interior finish
• Painted white hull and deck (RAL 9003)
• Paint finish: : Non-skid areas on deck
• Cockpit floor : Non-skid paint in white
• Interior : Living area satin white, other areas
light weight peel ply racing finish

Click here for full specs and prices

CONSTRUCTION

IM :
J :
ISPS :
P :
E :
UWSA :
DWSA

13.32 m / 43.70 ft
4.00 m / 13.12 ft
15.12 m / 49.61 ft
13.70 m / 44.95 ft
4.77 m / 15.65 ft
70.1 sqm / 755 sqft
178.4 sqm / 1,921 sqft

SAIL & DECKPLAN

© 2023 by Racing-Yachts.com

valencia in water